R-GAS is our special gas that can replace acetylene, MAPP Gas or LPG for brazing, cutting metal, or light weight welding. R-Gas is low cost, environmentally friendly, and does not present the explosion hazard of these other gases. No more bottled gas deliveries or heavy bottles to drag around. Produce the gas right on site. We cut out the middleman by putting our gas producing equipment right in your facility. But, you do not have to buy the gas producing equipment! If you qualify, we’ll put the equipment in your facility for free ... You just purchase the gas it produces at 25% less than what you are currently paying for other gases.

To purchase the gas you must have a minimum usage of $2,000 a month in gas bills for cutting and brazing (not Argon).

*Click Here to Watch a Real Player video on R-Gas.

To see us cut through 7 inches of steel, click on 7 Inch cut.

*(In order to watch this video, you must have Real Player. If you do not have it installed on your computer, you can download and install it for free. Just Click Here.)

*Click Here to Watch a Windows Media Player video on R-Gas.

R-Gas is a revolutionary new technology in which water can be "burned" as a fuel. Through a patented process, water is safely separated into hydrogen and oxygen gases, and then molecularly rearranged to create a new, "stoichiometric" mixture, called R-Gas. It is now HHO, rather than HOH, the usual molecular structure of water.

This amazing discovery has brought about the creation of a revolutionary new gas welder with  "never-heard-of-before" features ... With this one piece of equipment you can combine dissimilar metals, cut steel, even weld aluminum. When the flame from R-Gas is applied to any material, it develops the correct temperature required to weld, braze or cut that material. So, the same flame that can weld aluminum can sublimate tungsten.

The gas can be used with all conventional blowtorches, ignition being obtained with a simple hot spark.

 The flame does not emit ultra-violet light, thus welders do not require expensive protective eyewear. The temperature of the flame, when not in contact with material, is only 259º-279º.
 

When the flame from R-Gas is applied to a material, it develops the correct temperature required to weld, braze and cut just about any material. No temperature or gas adjustment is required.

This variability allows you to safely weld fast-melting metals and ceramics, directly weld aluminum and Al-based alloys, and even sublimate tungsten metal with temperatures exceeding 13,000ºF.

The flame can combine dissimilar metals together such as brass and aluminum.

R- Gas - Oxy/Acetylene Cutting Comparison
Tip Size	Metal Thick	Press. Oxy	Press. Fuel	CU FT/ Hr Use Oxy	CU FT/ Hr Use Acet	Acet Cost/HR @30¢/ CU FT	Speed IN/Min	R- Gas Cost/HR @8¢/kWh	B. Gas Usage /LHR
0	1/4"	30	2	50	17	$5.10	20	3.2¢	100 lh
1	3/8"	30	3	90	25	$7.50	19	4¢	125 lh
2	1/2"- 1"	45	3	140	27	$8.10	15	4.8¢	150 lh
3	1"- 2"	50	3	165	29	$8.70	12	8.8¢	250 lh
4	2"- 3"	50	3	270	31	$9.30	9	17.6¢	500 lh
5	3"- 4"	50	4	330	45	$13.50	8	35.2¢	1,000 lh
6	5"- 6"	55	5	465	52	$15.60	6	52.8¢	1,500 lh

LHR= LITERS PER HOUR
kWh = KILO WATT HOUR
CU FT = CUBIC FEET