Miracle Shield is a new technology that protects, renews and prolongs the life of many materials. A coat of Miracle Shield can protect your lawn chairs from rusting, renew your driveway, extend the life of your roof, or protect your exterior walls from graffiti. It is guaranteed not to chip, crack, peel or yellow. There’s no mixing or diluting. Miracle Shield comes ready to use. It can be applied with a brush, sprayer or roller, or even with a sponge. It can be used on vinyl, plastic, rubber, metal, interior wood, roofs, concrete, asphalt, stone work and brick work. Miracle Shield dries to a satin finish that is completely scratch resistant.

Miracle Shield Protects Against • mildew • moisture • water • grease • grime • oil • wear

*Click Here to Watch a Real Player video on Miracle Shield.

*(In order to watch this video, you must have Real Player. If you do not have it installed on your computer, you can download and install it for free. Just Click Here.)

*Click Here to Watch a Windows Media Player video on Miracle Shield.

MIRACLE SHIELD

Surfaces –   Miracle Shield can be used on the following surfaces.
Vinyl         Plastic    Rubber    Metal    Interior Wood    Roof’s    Concrete    Asphalt    Stone Work    Brick Work 

NOTE: Outdoor applications should be a minimum of two coats solution. 

Finish –Miracle Shield, will dry to a satin or low-luster semi-gloss finish. Which is scratch resistant. There is no buffing required.

Application - Miracle Shield can be applied as follows:
Brush it on    Spray it on    Roll it on with a short nap roller   Wipe it on   Sponge it on  Miracle Shield hardens best at a surface temperature of 55 degrees or higher on an average of 15 - 20 minutes.

Surface Preparation - In order for Miracle Shield to work properly, the surface must be free from any dust, dirt grease, grime or wax. You can remove any oil, wax or grease with household rubbing alcohol.

Cleaning Properties –Miracle Shield has no known cleaning properties such as some other multi-purpose sealants. However, some applications have shown that mild mars, rust and stains have been removed when applied.

Viscosity - The thickness of Miracle Shield is determined by it’s application. The standard application id either by brush, spraying or rolling. With standard applications, about 2 mil. of product is realized per coat.

Product Indications / Preparation – Miracle Shield comes already mixed and ready for use right out of the container. There is no mixing or dilution necessary.
No mixing    No diluting     No concentrates to bother with   Water Soluble   Ready to use   Cleans with soap and water when wet   Cleans with alcohol when dry

Restrictions – Miracle Shield is not to be used on glass, mirrors, chrome or brass.

Hazards – Miracle Shield is a mixture of 55% water and 45% chemical solvent.
Combustible fumes are emitted in it’s wet state.
 Perfectly safe in it’s dry state
When applying, ventilate area of application well
Keep container closed when not in use. 

Product Highlights 

Protects Against
 Mildew / Moisture / Water   Graffiti    Grease / Grime / Oil    Wear on non-cloth surfaces 

Guarantee – Miracle Shield is guaranteed not to chip, crack, peel or yellow. 

Sold – Miracle Shield is available in 5 gal containers or 55 gal drums.